Untitled

Intro/Contact | Design & Build Workholding | CNC Production Machining | Precision Tooling & Gaging | Quality Control | Equipment

 

Workholding Fixture Types

Gallery 2



Types of Fixtures
These are 4 typical examples of fixtures designed & built to hold a wide variety of parts during the manufacturing process. More examples of fixtures are highlighted in the slideshow galleries above.
 

Click To Enlarge
This is a hydraulic actuated 4-nest fixture plate that mounts on a common base shared with several other plates.

Click To Enlarge
This is a hydraulically actuated, self-centering chucking fixture for use on a twin-spindle milling machine. Since this fixture will run millions of parts extra time was invested to make sure that metal chips would be carried off of the fixture.

Click To Enlarge
This is a hydraulically actuated 4-sided tombstone for a horizontal machining center.

Click To Enlarge
This is a 2 nest trunion fixture for a vertical machining center. It's rotary motion is limited to 180 degrees.
 

ISO 9001:2000
James Tool Machine & Engineering, Inc.
130 Reep Drive Morganton, NC 28655
phone: 828-584-8722 fax: 828-584-8779

North Carolina 28680 (Burke Co.) Voice: 828.584.8722 FAX:828.584.8779
Copyright © 2005 James Tool Machine and Engineering, Inc. All Rights Reserved.